Products
Waysafe Original 110 - simple low cost safety.
|
Waysafe Original is available for either analytical or top pan type balances as shown. Many hundreds of these popular items are in use throughout the U.K. and worldwide.
The only difference between the two models is the configuration of the front panel. WS110/A is for analytical balances where the operator is sitting down.
WS110/T is for top-pan balances where the operator is usually standing. Weighing media powder in a microbiology laboratory is a typical example.
Both models share the following common features. Fronts, sides and tops are made from clear acrylic. The front panel simply lifts off so that access for cleaning or filter changing is easy. The back panel and base use white food grade plastic board.
A powerful fan draws air through three simple face mask filters. Particles are contained within the enclosure or are trapped by the low cost filters. The filters can be changed by the operator in a few minutes.
Waysafe Original puts the mask on the balance - not on the operator.
|
|


|
Specification:
Height 500mm, width 550mm, depth overall 600mm.
Filters: Comply with EN143. Efficiency 96% at 0.5micron
Electrical:230V 35W 50Hz. Meets requirements of LVD and is CE marked.
References:WS110/A for analytical balances, WS110/T for top pans. For spares see prices page.
Waysafe 2 - simple low cost safety.
Waysafe 2 enclosures are principally for use with stereo microscopes like those shown in the pictures. It has a HEPA filter with a pre- filter and a powerful fan to draw contaminated air away from the operator.
A simple Hi Lo switch controls the fan speed with indicator lights to show the status. The filters can be changed in minutes by the operator - no expensive service engineer call outs - and the whole unit comes out of the box and is ready to use immediately. The frame is 20mm anodised aluminium and it is glazed with clear acrylic. A simple base tray is supplied.
WAYSAFE 2 is used by most asbestos analysis companies
Specifications
230V 35W. Meets LVD and is CE marked.
Airspeed: High >0.5m/s, Low 0.3m/s.
Outside dimensions: Height 500mm, depth 540mm, width 640mm.
Hepa filter efficiency: 99.997% @ 0.3 micron.
Filter size: 305 x 305 x 65mm
Base tray supplied.
Reference: WS2/W. See prices page for spares.
|
|


|
WAYSAFE 3 - simple low cost safety.
Waysafe 3 is for balances or general protection. It has a HEPA filter (99.997% efficient at 0.3 micron) and a two speed fan. If the HIGH airspeed of >0.5m/s is too much for your sensitive balance then just switch the speed down to LOW for an airspeed of about 0.3m/s or OFF while you take a reading. The robust aluminium framework is glazed with clear acrylic.
There is plenty of room for a big balance like the one on the right and it will fit on standard laboratory benchtops. The front panel has no hinges and simply lifts off for cleaning and filter changing. The access ports give a full range of movement for normal operation and there is a power access hole with cover at the back.
Filters are changed by the operator in a few minutes so there are no expensive call out charges.
Waysafe 3 gives you a safety enclosure anywhere you want it.
|
|


|
Specification:
Please note that Waysafe 3 is for use only with particulates.
Hepa filter efficiency: 99.997% @ 0.3 micron..
Filter size: 305 x 305 x 65mm. Prefilter fitted
Airspeed: High >0.5m/s, Low 0.3m/s.
Outside dimensions: Height 500mm, depth 610mm, width 540mm.
Electrical: 240V 60W 50Hz. CE marked. Meets requirements of LVD and EN61010 part 1 .
Reference: WS3. For spares see prices page.
|